Up

Módulos Proyecto SKILLS (Inglés)

In this section, you can download the pedagocial modules in English developed in the SKILLS project of the European Agency Leonardo Da Vinci. These pedagogical modules are under a license Creative Commons: you can download them and use them freely, but you cannot sell them or modify them. If you use them, you must indicate clearly the creators of modules (project SKILLS).
These modules are provided in PDF version (Acrobat). If you're involved in education, VETs or any training activiy, you can request these modules in PPT version (Powerpoint) by sending an e-mail to acasteleiro@ascem.org.
Licencia de Creative Commons
These works are under a Creative Commons licence.

 

2. ACTIONS (4.55 MB)

This module provides information on determination of the design actions on a single-storey building according to the different parts of EN 1991, as well as combinations of actions to EN 1990

This module is an important training module in so far as it covers the design of the main frame of single storey buildings. It aims at clarifying complex design procedures in EN 1993-1-1.

This module covers the design of built-up steel columns according to the European standard EN 1993-1-1. It contains a worked example which describes all steps in the design procedure, including design of the connections.

This module is dedicated to the design of truss structures. Design procedure (global analysis, verification of members and connections) is presented. General rules based on EN 1993-1-1 and EN 1993-1-8 are illustrated by a worked example.

This module is a continuation of the training module « TRUSSES – Part 1 ». This module is dedicated to the design of truss structures. Design procedure (global analysis, verification of members and connections) is presented. General rules based on EN 1993-1-1 and EN 1993-1-8 are illustrated by a worked example.

This module covers the design of joints in frame structures of steel buildings, according to the European standard EN 1993-1-8. A design process for moment-resisting bolted end-plate connections is presented.

This module is a continuation of the training module « Moment connections – Part 1 ». It contains a worked example which describes all steps in the design procedure of the beam-to-column joint (eaves end-plate connection with haunch).

8. BASE PLATES (6.78 MB)

The design process of a pinned base-plate connection under axial and shear forces is described in this module. Several figures show typical structural details in order to explain the function of each component of the connection (base plate, anchor bolts, shear nib, etc.) A detailed worked example is also included.

This module deals with the new European standard EN 1090 for fabrication and execution of steel structures, which will come into force in all European countries in July 2014.

11. FIRE DESIGN (5.50 MB)

This module describes a simple and practical approach to the fire design of steel members in single-storey buildings according to EN 1993-1-2.

A short document providing essential information about sustainability in the field of steel construction. It includes all the advantages of using steel and many references to available resources that represent the state of the art.

Exponer# 

ASCEM COLABORA CON:

logo eccslogo-aenorLogo-confemetallogo uahe 2013 blogo upmLogo-ATEGlogo consejo colegioslogo base-2b

Esta web utiliza cookies para su funcionamiento y para que podamos mejorar su experiencia como usuario. Al navegar en esta web, acepta el uso de dichas cookies. Para saber más, consulte nuestra Política de cookies.

Acepto las cookies de esta web.